適用范圍 Application

LANKAI 恒溫FOC直流無刷電機控制器廣泛適用于各式振蕩器，搖床搖瓶機，電動攪拌器，磁力攪拌器，反應釜等高精度恒速設備。

Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.

產品特點 Feature

LANKAI 恒溫FOC直流無刷電機控制器LKSC-C系列產品是高集成智能溫速一體控制模塊，其性能如下：

①采用最新FOC 正弦波矢量控制技術和模糊PI控制技術，運行平穩，緩啟緩停，大力矩，輕噪音，發熱低，可長時間穩定運行，帶過流過速堵轉保護電機等功能。標配57、86電機, 也可適配其他支持FOC的無刷電機。

②適配直流無刷電機伺服電機。恒速，恒扭矩模式、電機正反轉可切換。 

③采用多年自研模糊PID控溫，超調小,穩定快，過沖低。自適應PID，一鍵自整定。

④超溫，傳感器脫落報警保護，可設置99段程序。

⑤擴展：支持標準RS485等通用接口，可配置MODBUS RTU 通訊協議，一臺主機控制多套設備，EEPROM存儲下載，數據自采集。可接上位機軟件，查看歷史實時數據或者曲線。

①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions  of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.

②Can set to operate by constant speed or constant torque mode. 

③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.

④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.

⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.

技術參數 Technical Parameter?