QQ交談培養搖瓶SHAKE FLASKS培養搖瓶SHAKE FLASKS
- 公司名稱：
- 更新時間：
- 所 在 地：
- 生產地址：
- 瀏覽次數：
- 上海君翼儀器設備有限公司
- 2016-05-30 03:32:04
- 上海市
- 培養搖瓶SHAKE FLASKS
- 2500
【簡單介紹】
品牌 : 美國Chemglass
備注 : 各種款式搖瓶SHAKE FLASKS，適用于微生物等培養，一般是實驗室水平的發酵，發酵量較小，用于實驗通途。也是大型發酵前期種子培養的方式。
【詳細說明】
各種款式搖瓶SHAKE FLASKS，適用于微生物等培養，一般是實驗室水平的發酵，發酵量較小，用于實驗通途。也是大型發酵前期種子培養的方式。
CLS-2040
SHAKE FLASKS, 3 STANDARD BAFFLES, REINFORCED TOP
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
| Item Number | Item Description | PQ |
| CLS-2040-01 | Flask, Shake, 125mL, Baffled, Plain Top, Approx OD x Height （mm）: 70 x 115 | EACH |
| CLS-2040-02 | Flask, Shake, 250mL, Baffled, Plain Top, Approx OD x Height （mm）: 80 x 135 | EACH |
| CLS-2040-05 | Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2040-07 | Flask, Shake, 2000mL, Baffled, Plain Top, Approx OD x Height （mm）: 155 x 270 | EACH |
CLS-2042
SHAKE FLASKS, 3 DEEP BAFFLES, REINFORCED TOP
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker.
| Item Number | Item Description | PQ |
| CLS-2042-02 | Flask, Shake, 250mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 80 x 135 | EACH |
| CLS-2042-04 | Flask, Shake, 500mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 100 x 180 | EACH |
| CLS-2042-05 | Flask, Shake, 1000mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2042-07 | Flask, Shake, 2000mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 155 x 270 | EACH |
CLS-2044
SHAKE FLASKS, 3 STANDARD BAFFLES, DELONG NECK
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2044-01 | Flask, Shake, 50mL, Baffled, Delong Neck, Approx OD x Height （mm）: 50 x 110 | EACH |
| CLS-2044-02 | Flask, Shake, 125mL, Baffled, Delong Neck, Approx OD x Height （mm）: 70 x 145 | EACH |
| CLS-2044-03 | Flask, Shake, 250mL, Baffled, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2044-05 | Flask, Shake, 500mL, Baffled, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2044-06 | Flask, Shake, 1000mL, Baffled, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2044-08 | Flask, Shake, 2000mL, Baffled, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
CLS-2046
SHAKE FLASKS, 3 DEEP BAFFLES, DELONG NECK
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2046-01 | Flask, Shake, 50mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 50 x 110 | EACH |
| CLS-2046-02 | Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 70 x 145 | EACH |
| CLS-2046-03 | Flask, Shake, 250mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2046-05 | Flask, Shake, 500mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2046-06 | Flask, Shake, 1000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2046-08 | Flask, Shake, 2000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
| CLS-2046-09 | Flask, Shake, 3000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 185 x 340 | EACH |
| CLS-2046-10 | Flask, Shake, 4000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 205 x 370 | EACH |
CLS-2048
SHAKE FLASKS, 6 BAFFLES, DELONG NECK
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2048-04 | Flask, Shake, 250mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2048-05 | Flask, Shake, 500mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2048-06 | Flask, Shake, 1000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2048-08 | Flask, Shake, 2000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
| CLS-2048-09 | Flask, Shake, 3000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 185 x 340 | EACH |
| CLS-2048-10 | Flask, Shake, 4000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 205 x 370 | EACH |
CLS-2050
SHAKE FLASKS, 4 BAFFLES, CONSTRICTION, DELONG NECK
Flask has 4 bottom baffles and a constriction just below the neck to prevent splashing from reaching the closure.
| Item Number | Item Description | PQ |
| CLS-2050-02 | Flask, Shake, 250mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2050-04 | Flask, Shake, 500mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2050-06 | Flask, Shake, 1000mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
CLS-2051
SHAKE FLASKS, 3 BAFFLES, GL THREAD, VENTED CAP
Flask has 3 baffles on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. The polypropylene vented caps have a 0.22µm （PTFE） hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.
| Item Number | Item Description | PQ |
| CLS-2051-02 | Flask, Shake, 125mL, 3 Baffles, GL-32 Thread, Vented Cap, Approx OD x Height （mm）: 65 x 120 | EACH |
| CLS-2051-04 | Flask, Shake, 250mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 80 x 125 | EACH |
| CLS-2051-06 | Flask, Shake, 500mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 100 x 170 | EACH |
| CLS-2051-08 | Flask, Shake, 1000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2051-10 | Flask, Shake, 2000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 170 x 270 | EACH |
| CLS-1484-10 | Cap, GL-45, Vented, Gray, Non-Sterile | |
CLS-2052
SHAKE FLASKS, 6 BAFFLES, GL-45 THREAD, VENTED CAP
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Gray polypropylene vented cap has a 0.22µm （PTFE） hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.
| Item Number | Item Description | PQ |
| CLS-2052-04 | Flask, Shake, 250mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 80 x 125 | EACH |
| CLS-2052-06 | Flask, Shake, 500mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 100 x 170 | EACH |
| CLS-2052-08 | Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2052-10 | Flask, Shake, 2000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 170 x 270 | EACH |
CLS-1490
CLOSURES, SILICONE SPONGE
The silicone sponge closure is manufactured with a sealed in .2 micron silicone sponge filter. Flange fits snugly over the necks of vessels permitting the exchange of gases, while reducing evaporation and preventing the passing of aerosols. Ideal for use with aerobic cultures. Reusable, autoclavable and will withstand dry heat sterilization up to 180°. Closure will withstand both dry heat sterilization and repeated autoclaving.
CLS-1490-013 fits: 13-18mm Culture Tubes and 18mm Screw Necks
CLS-1490-020 fits: 18-25mm Culture Tubes, 25-50mL Erlenmeyer Flasks and 25-125mL Delong® Flasks
CLS-1490-028 fits: 125 and 250mL Erlenmeyer Flasks
CLS-1490-038 fits: 38mm Delong® Style Flask or Tube Necks, 38mm Culture Tubes, 500 and 1000mL Standard Erlenmeyer Flasks and GL-45 Screw Threads
| Item Number | Item Description | PQ |
| CLS-1490-013 | Closure, Silicone Sponge, 13mm | P10 |
| CLS-1490-020 | Closure, Silicone Sponge, 20mm | P10 |
| CLS-1490-028 | Closure, Silicone Sponge, 28mm | P10 |
| CLS-1490-038 | Closure, Silicone Sponge, 38mm | P10 |
CLS-1502
CLOSURES, STAINLESS STEEL
These closures are made from 305 Stainless Steel. They are ideal for use with culture tubes and flasks utilizing Delong Necks. The closure is designed with finger grips to allow it to fit firmly on any Delong Neck. It will withstand both dry heat sterilization and repeated autoclaving.
| Item Number | Item Description | PQ |
| CLS-1502-018 | Closure, 18mm, Stainless Steel | P10 |
| CLS-1502-025 | Closure, 25mm, Stainless Steel | P10 |
| CLS-1502-038 | Closure, 38mm, Stainless Steel | P10 |
CLS-1503
CLOSURES, POLYPROPYLENE
Delong style closure made of polypropylene. Closure offers two positions, open for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination. Autoclavable to 121°C.
| Item Number | Item Description | PQ |
| CLS-1503-09 | Closure, 25mm, Polypropylene | P10 |
| CLS-1503-10 | Closure, 38mm, Polypropylene | P10 |
CLS-1480
CAPS, SOLID, GL-THREADS, POLYPROPYLENE
Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.
The Premium Clear Caps are made from TpCh260 （similar to PFA） with PTFE coated silicone seal. Premium Cap Compound is formulated without colour dye to avoid risk of leaching. Premium caps can be used in temperatures from -196° to 260°C.
| Item Number | Item Description | PQ |
| CLS-1480-10 | Cap, GL-25, Blue, Solid, Polypropylene | P10 |
| CLS-1480-11 | Cap, GL-32, Blue, Solid, Polypropylene | P10 |
| CLS-1480-12 | Cap, GL-32, Orange, Solid, Polypropylene | P10 |
| CLS-1480-13 | DISCONTINUED: PLEASE SEE CLS-1480-13SC | |
| CLS-1480-13SC | Cap, GL-45, Schott Blue, Solid, Polypropylene | P10 |
| CLS-1480-14 | Cap, GL-45, Gray, Solid, Polypropylene | P10 |
| CLS-1480-15 | Cap, GL-45, Green, Solid, Polypropylene | P10 |
| CLS-1480-16 | Cap, GL-45, Orange, Solid, Polypropylene | P10 |
| CLS-1480-17 | Cap, GL-45, Purple, Solid, Polypropylene | P10 |
| CLS-1480-18 | Cap, GL-45, Yellow, Solid, Polypropylene | P10 |
| CLS-1480-19 | Cap, GL-45, Clear, Solid, Made From TpCh260 （similar to PFA） with PTFE coated silicone seal. Compound formulated without colour dye to avoid risk of leaching. | PK5 |
CLS-1481
CAPS, OPEN TOPS, GL-THREADS, POLYPROPYLENE
Open top polypropylene caps for use with port assemblies. Caps can be autoclaved in steam to 140°C.
| Item Number | Item Description | PQ |
| CLS-1481-20 | Cap, GL-32, Blue, Open Top, Polypropylene | P6 |
| CLS-1481-21 | Cap, GL-45, Blue, Open Top, Polypropylene | P6 |
| CLS-1481-22 | Cap, GL-45, Green, Open Top, Polypropylene | P6 |
| CLS-1481-23 | Cap, GL-45, Yellow, Open Top, Polypropylene | P6 |
CLS-1482
POURING RINGS
Steam autoclavable to 140°C. All pouring rings are polypropylene except for the CLS-1482-30 which is made of high temperature ETFE （Ethylene Tetrafluoroethylene）; max temp is 180°C.
| Item Number | Item Description | PQ |
| CLS-1482-11 | Pouring Ring, GL-32, Blue, Polypropylene | P10 |
| CLS-1482-12 | Pouring Ring, GL-32, Clear, Polypropylene | P10 |
| CLS-1482-13 | Pouring Ring, GL-45, Blue, Polypropylene | P10 |
| CLS-1482-14 | Pouring Ring, GL-45, Green, Polypropylene | P10 |
| CLS-1482-15 | Pouring Ring, GL-45, Gray, Polypropylene | P10 |
| CLS-1482-16 | Pouring Ring, GL-45, Yellow, Polypropylene | P10 |
| CLS-1482-17 | Pouring Ring, GL-45, Clear, Polypropylene | P10 |
| CLS-1482-30 | Pouring Ring, GL-45, Red, ETFE | P10 |
CLS-1484
CAPS, VENTED, POLYPROPYLENE, NON-STERILE
Polypropylene vented cap has a 0.22µm （PTFE） hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C.
| Item Number | Item Description | PQ |
| CLS-1484-25 | Cap, GL-25, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
| CLS-1484-32 | Cap, GL-32, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
| CLS-1484-10 | Cap, GL-45, Gray, Vented, Non-Sterile, Polypropylene | EACH |
| CLS-1484-12 | Cap, GL-45, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
CLS-1486
HIGH TEMPERATURE CAPS, SOLID, PBTE, PTFE SEALS
High temperature PBTE cap will withstand temperature from -45 to 200°C. Complete with PTFE seal.
| Item Number | Item Description | PQ |
| CLS-1486-01 | High Temperature Cap, GL-32, Solid, PBTE | EACH |
| CLS-1486-02 | High Temperature Cap, GL-45, Solid, PBTE | EACH |
相關產品
- CELLine 350美國Wheaton CELLine培養瓶
- Celstir jacket美國Wheaton Celstir雙側臂細胞培養瓶
- 美國Wheaton Magna Flex細胞培養瓶
- Wheaton細胞培養箱
- MINI SMALLWheaton臺式桌面滾瓶細胞培養裝置
- R2P 2.0WHEATON滾瓶細胞培養裝置
- SCHOTT DURAN®培養瓶SCHOTT DURAN® 培養基培養瓶
- SCHOTT DURAN®SCHOTT DURAN®Erlenmeyer培養瓶
- SCHOTT DURAN®培養瓶SCHOTT DURAN®培養基培養瓶
- SCHOTT DURAN®ErlenmeSCHOTT DURAN®Erlenmeyer培養瓶
- SCHOTT DURAN®培養瓶SCHOTT DURAN® 培養瓶
- SCHOTT DURAN®PenicilSCHOTT DURAN®Penicillin培養瓶
- SCHOTT DURAN®培養瓶SCHOTT DURAN®培養瓶
- SCHOTT DURAN®FernbacSCHOTT DURAN®Fernbach圓錐形培養瓶
- SCHOTT DURAN®FernbacSCHOTT DURAN®Fernbach培養瓶
- SCHOTT DURAN® 培養皿
- SCHOTT DURAN®細胞培養瓶SCHOTT DURAN®細胞培養瓶
- SCHOTT DURAN®細胞培養轉瓶SCHOTT DURAN®細胞培養轉瓶
- ®（一次性）培養管（一次性）培養管
- 轉瓶Spinner Flasks轉瓶Spinner Flasks
- Fernbach Flas費恩巴赫培養瓶Fernbach Flasks
- 培養搖瓶SHAKE FLASKS培養搖瓶SHAKE FLASKS
請輸入產品關鍵字：
郵編：
聯系人：王經理
電話：86-21-67159386
傳真：
手機：18621801483
留言：發送留言
個性化：www.shwi.com.cn
網址：www.lab17.com.cn
商鋪：http://www.weixunsd.com/st235541/