塑料水平垂直阻燃試驗機適用范圍

    用于測試塑料類及非金屬材料類物質燃燒性能的試驗儀器。適用于塑料和非金屬材料試樣處于50W火焰條件下，水平或垂直方向燃燒性能的試驗室測定方法。(實物如右圖)

• 塑料水平垂直阻燃試驗機產品功能特點

1. 微電腦控制操作
2. 自動化程度高：自動記錄試驗時間并可保存，自動顯試結果，自動計時，自動點火，自動報警系統，施焰結束后本生燈自動退回
3. 水平、垂直燃燒試樣夾電機控制
4. 記時準確

   三、相關技術參數

①儀器合適工作條件及主要技術指標

1. 環境溫度：室溫～40℃； 相對濕度：≤75％；
2. 供電電壓和功率：220V±10％       50HZ     功率150W
3. 本生燈自動點火時間：任意設定
4. 本生燈內徑9.5mm±0.5mm
5. 氣源：液化石油氣（仲裁時加工業甲烷氣）；
6. 304全不銹鋼箱體耐高溫高濕高腐蝕環境
7. 燃燒箱內部容積：0.75立方米（不銹鋼款）
8. 儀器重量約：100kg
9. 工作電源 ：  220V  AC  50HZ
10. 計時范圍：0~999s 記時精度：10s±0.2s　30s±0.2s；
11. 施焰時間 ：  0～999.9S（可調）
12. 余焰時間 ：  0～999.9S（可調）
13. 余灼時間 ：  0～999.9S（可調）
14. 燃燒角度 ：  0°、20°、45°可選擇
15. 火焰高度 ：  20mm ~ 175mm   可調
16. 火焰溫度：（100-1000）℃可調
17. 氣體流量 ：  0.03~ 0.3ml/Min
18. 燃 燒 燈 ：  燈管內徑9.5±0.3mm,長度：100mm±10mm
19. 時間裝置 ：  能精確到0．5S
20. 位置調節 ：  樣品夾支架可上下、左右調節，燃燒座可前后調節，調節行程均大
21. 設備外形尺寸：0.75立方不銹鋼款箱體 長*款*高1300*650*1200

②設計標準：

GB-T2408-2008《塑料燃燒性能的測試-水平法和垂直法》（ANSI/UL94 -2006）

③符合標準：

GB-T5455 《 紡織品 燃燒性能試驗 垂直法》

GB-T13488《橡膠燃燒性能測定—垂直燃燒法》

GB/T5169.16-2002

ANSI/UL94

IEC60950-1、

IEC695-2-2

四、產品配置

1. 設備主機       壹臺

1. 電源線         壹根         
2. 滴落盤         壹只              
3. 點火器         壹只     
4. 螺絲刀         壹只
5. 緊箍       貳個
6. 氣源管         壹點伍米
7. 備用標尺    壹把
8. 說明書         壹份
9. 合格證       壹張

Product Name: Horizontal and vertical burning tester

Product Model:CZF-5

Design Standards ：GB/T2408-2008 Plastics. Determination of burning characteristics. Horizontal and vertical test

Brief Introduction :That horizontal and vertical burning tester is designed according to the chinese national standard《 GB/T2408-2008  Plastics. Determination of burning characteristics. Horizontal and vertical test》and meet the requirements of it compley。Both the horizontal and vertical burning test  can be completed in this machine。The test data can be recorded and saved automatically。It is also  suitable for the chinese national standard《 GB/T 5455 Textiles. Burning behaviour. Vertical method 》.And unlike the CZF-3 tester ,it^,s  more sophisticated and more automated。 The burning body is 0.5m3and that is larger than the CZF-3 tester。By the way， 0.5m3 is in accordance with UL94-2006 and GB-T2408-2008。

Design standard of the  horizontal and vertical burning tester  ：

GB-T2408-2008《  Plastics. Determination of burning characteristics. Horizontal and vertical test》

The standard can be meet: UL94-2006、GB-T 5455 、 GB-T13488 、GB-T5169、 IEC60695-11-3、IEC60695-11-4、IEC60950-1、IEC695-2-2

（一）The  environmental requirements

1.    Requirements about environmental temperature  : -10℃～30℃

2.    Relative humidity:≤85％

3.    Supply voltage and power:220V±10％ ,  50HZ  150W

(二)Characteristic

1. The diameter of the burner is 9.5mm+0.3mm，The diameter ofthe Bunsen burner is 9.5mm±0.5mm
2. There is a screw nut on the bunsen burner used to control the height of  blue flame
3. The auto-ignition time of the bunsen burner can be set up arbitrarily
4. it^，s tilt angle is between  0° and45°，EachInterval can be tilted 5 degrees automatically
5. You can djust the flame height between 20mm + 2mm and 100mm + 10mm
6. The bunsen burner move to the bottom of the test sample quickly  through the motor
7. The bunsen burner  return  automatically when the flame application completed
8. The flame applying time  of  the bunsen burner is between0～999.9S+0.1s and it can set up  automatically  within that band。the flame can set up between 20 and 175mm
9. The  afterflame time  can set up between 0 to 999.9S+0.1s and the tester will keep the minutes  automatically ，in addition，you can  pause it manually
10. The  residual burning time can set up between 0 and 999.9S+0.1s and the tester will keep the minutes  automatically ，in addition，you can  pause it manually
11. The source can sue 98% methane、 natural gas、 liquefied petroleum gas or  coal gas
12. Flux of the  methane can set up between 105ml/min and1000ml/min。
13. A electronic switch is  set on the gas pipeline
14. You should close the  The gas switch on the  panel when the test is  finish，around this time， the bunsen burnerwill in time go out of itself
15.  The burning body is 0.5m3and it has a black  background ，the  background illumination  must be 20Lux or less 。Moreover， we also have 0.75m3 burning body if it is  in need

the upper and lower left and right travel of  the sample frame must be 300mm or more  。There is a servo motor cotrol  the horizontal and vertical  distance   from test sample and  the flame

1.  The  flue gas  will  be discharged  by the ventilating fan who is   on the experimental box top when  the test finish
2. The whole test process is automatically controlled and the ventilation system is independent