SANTEST_GYDC-05位移傳感器控制器SANTEST_GYDC-05-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd

GYDC-05是日本SANTEST公司生產的線性位移傳感器控制器，高精度，高品質，：

GYDC-05 controller enables digital output of 1μm resolution and
also analogue output.
Other features are as options,
-Additional analogue output of magnet velocity
-SSI output and incremental output
GYDC-05 controller can be used with:
GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR/GYcRP probes.

Specifications

Digital output (position)	Parallel Binary / (Gray code user-configurable) / Negative logic (「1」 at transistor on) Incremental output (RS422 line drivers) (Option) SSI output (Option)
Digital output (position) Resolution	0.01mm/bit (Probe:GYcRS, MR5, FRS)/0.1, 0.05, 0.005, 0.002, 0.001mm/bit 01mm/bit(Probe:GYGS, PM, HR, cRP, KM)/0.01mm/bit(Probe:GYHR)
Analogue output (position) (OUT1)	0-10V / (output current:Max.5mA, load:Min.2kΩ) 4-20mA (oad:Min.500Ω) Resolution:16bit(1/65536) (Probe:GYcRS, MR5, FRS) Resolution:0.01%FS (Probe:GYGS, PM, HR, cRP, KM)
Velocity output (OUT2)	±10V or 4-20mA
Alarm output	Open collector　0.1A　30VDC (Cable disconnection and magnet drop)
Power supply	+24VDC±5% ( < 160mA)
Frequency resp.	Std 1kHz (depending on stroke) sampling
Temp drift	±10ppmFS/°C
Operating Temp	0°C-+65°C
Storage Temp	-20°C-+75°C

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Digital output
1:Standard (parallel, negative logic, binary code)
2:Incremental output (250kHz)
5A:SSI asynchronous
5S:SSI synchronous

(2):Resolution
D2:0.1mm
D3:0.05mm
D4:0.01mm (Standard)
D5:0.005mm
D7:0.002mm
D8:0.001mm

(3):Direction of output (toward probe tip)
D:output data increase
R:output data decrease

(4):Probe
RS:GYcRS probe
R5:GYMR5 probe
FS:GYFRS probe
GS:GYGS probe (Resolution 0.1mm(D2) only)
PM:GYPM probe (Resolution 0.1mm(D2) only)
RP:GYcRP probe (Resolution 0.1mm(D2) only)
KM:GYKM probe (Resolution 0.1mm(D2) only)
HR:GYHR probe

(5):Effective stroke (mm)

(6):Dead zone length of probe head side (mm)

(7):Analogue position output (OUT1)

AD	0-10V(Std)
AR	10-0V
BD	4-20mA
BR	20-4mA
CD or CR□□ bipolar output [ex] CD10 CR05	□□V-□□V -10V-+10V +5V--5V
V Z/F [ex] V1/5 V9.5/0.5	custom order 1-5V 9.5-0.5V
I Z/F [ex] I5.12/20 I20/5.38	custom order 5.12-20mA 20-5.38mA

*Z＝Zero position *F＝Full scale position

(8):Option:Analogue output (OUT2)
position output:see (7)
velocity output (Note1)
VA[ ]　±10V
WB[ ]　4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity=9.99mm/sec)
N:No option

(9):Magnet and Float

Magnet	Float
M0:No.Φmagnet M0SM:No.ΦSPM magnet M0LM:No.ΦLPM magnet M2P:No.2P magnet M2PN:No.2PN magnet M3:No.3 magnet M11:1 magnet M11N:1N magnet T142:No.T14-M2 magnet T144:No.T14-M4 magnet T162:No.T16-M2 magnet T163:No.T16-M3 magnet MG□:other magnet	F28S:Φ28SS316 float F30S:Φ30SS316 float F40S:Φ40SS316 (B) float F42S:Φ42.5SS316 float F50S:Φ50SS316 float F54S:Φ54SS304 float F25N:RF-A10 plastic float F28N:RF-A6 plastic float FL□:other float

(Note1)
VA:When magnet stops, output is 0V. When moving toward probe tip, +10V.
WB:When magnet stops, output is 4mA. When moving in any direction, 20mA.