ProSoft PLX31-EIP-MBTCP通信模塊
ProSoft PLX31-EIP-MBTCP通信模塊
※※※ 深圳市扎克貿易有限公司
※※※ 張瑞 188-24-24-3080(V同)
EtherNet/IP to Modbus TCP/IP
PLX31-EIP-MBTCP
ProSoft Technology’s EtherNet/IP™ to Modbus® TCP/IP communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™ enabled controllers or devices and Modbus® TCP/IP controllers or devices.
Our Modbus® TCP/IP driver features multiple client and server functionality, for faster data transmission. In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
A conformal coating option is available for this product.
Specifications
EtherNet/IP™ Specifications
Specification | Description |
Number of Class 3 Server Connections | 5 |
Supported PLC Types | PLC2, PLC5, SLC, CLX, CMPLX, MICROLX |
Supported Message Types | PCCC and CIP |
Class 3 Client Connections | Connected: 2 |
Number of Class 1 I/O Connections | 2 |
I/O connection sizes | 248/248 |
Max RPI time | 5 ms per connection |
CIP Services Supported | 0x4C - CIP Data Table Read |
Command List | Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count. |
Command Sets | PLC-2/PLC-3/PLC5 Basic Command Set |
Modbus® TCP/IP Specifications
Specification | Description | |
Supported Modbus Function Codes | 1: Read Coil Status | |
Supported Clients | 10 | |
Supported Servers | MBAP: 5 | |
Command List | Up to 160 fully configurable Client commands | |
Status Data | Error codes reported individually for each command | |
Command List Polling | Each command can be individually enabled or disabled; write-only-on-data-change is available |
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。