手機版
化工儀器網手機版
化工儀器網小程序
官方微信
公眾號：chem17
掃碼關注視頻號
本產品適用于分度號為：S、R、K、N、E、J、T型各種熱電偶與溫度顯示儀表之間的電氣連接，以提高測溫精度。一般用聚氯乙烯絕緣和護套補償導線，具有良好的防潮、耐腐和阻燃性能。氟塑料絕緣和護套補償電纜，具有耐高溫、耐酸、耐堿、耐油、耐磨、耐老化、防水和不燃燒等性能。硅橡膠絕緣補償導線、補償電纜具有耐油、防腐、抗老化和防水、柔軟等特點。
執行GB/T4989-94等效IEC584-3（1989）。
The product is applicable for the electric connection between various thermocouples and temperature-indicating instruments with index of S, R, K，N，E，J，T to improve the thermometric precision. The general PVC insulated and sheathed extension and compensating cable has the good performances such as moisture resistance, corrosiveness resistance and flame retardance. Fluoroplastic insulated and sheathed extension and compensating cable can be used in some circumstances with special requirements of high temperature resistance, acid resistance, alkali resistance, oil resistance, abrasion resistance, ageing resistance, water proof and flame resistance. Silicone rubber insulated and sheathed extension and compensating cable has good characteristics such as oil resistance, corrosiveness resistance, ageing resistance, water proof and flexibility, etc..
The product is manufactured according to GB/T4989-94, which is equivalent to IEC584-3（1989）.
一、使用特性 Requirement of application
1、工作溫度：普通級，zui高1350C——-200C；耐熱級：zui高2750C——-600C；耐火級：zui高5500C——-600C
Operating temperature: General: 1350C——-200C, heat resistant: 2750C——-600C, fire resisting: 5500C——-600C.
2、zui小彎曲半徑: Minimum bending radius:
1）聚氯乙烯絕緣護套 PVC insulation and sheath
平行式：不小于補償導線厚度的6倍；對絞式：不小于補償導線外徑的6倍。
Parallel type: The minimum bending radius is not less than 6 times the thickness of the extension and compensating cable.
Twisted pair type: the minimum bending radius is not less than 6 times the outer diameter of the extension and compensating cable.
2）氟塑料絕緣和護套 Fluoroplastic insulation and sheath
平行式：不小于補償導線厚度的10倍；對絞式：不小于補償導線外徑的10倍。
Parallel type: the minimum bending radius is not less than 10 times the thickness of the extension and compensating cable.
Twisted pair type: the minimum bending radius is not less than 10 times the outer diameter of the extension and compensating cable.
3）硅橡膠絕緣和護套 Silicone rubber insulation and sheath
平行式：不小于補償導線厚度的4倍；對絞式：不小于補償導線外徑的4倍。
Parallel type: the minimum bending radius is not less than 4 times the thickness of the extension and compensating cable.
Twisted pair type: the minimum bending radius is not less than 4 times the outer diameter of the extension and compensating cable.
4）無鎧裝層的補償電纜不小于電纜外徑的6倍；有鎧裝層的補償電纜不小于電纜外徑的12倍。
The minimum bending radius is not less than 6 times the outer diameter for non-armored extension and compensating cable and is not less than 12 times the outer diameter for armored extension and compensating cable.
相關產品
免責聲明
- 凡本網注明“來源：化工儀器網”的所有作品，均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品，未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的，應在授權范圍內使用，并注明“來源：化工儀器網”。違反上述聲明者，本網將追究其相關法律責任。
- 本網轉載并注明自其他來源（非化工儀器網）的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點和對其真實性負責，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品第一來源，并自負版權等法律責任。
- 如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。
采購中心