銷售：鐘        

NewSonic SonoDur-R自動在線硬度計、NewSonic SonoDur-R自動在線硬度計、

The NewSonic SonoDur-R 'Rack' is a UCI hardness tester designed for complete automated, * checks of mass-produced parts. The 19" desktop device performs rapid process monitoring (at one-second intervals) of mix-up testing procedures. Conforms to ASTM A1038.

The SonoDur-R is mainly used to test serial parts following heat treatment, surface processing or measuring coating hardness on gravure cylinders with highly-selective low-load motorized probes.

The SonoDur-R is the world's only automated UCI measurement system that is fully system compatible thanks to its USB and fully-isolated, digital I/O interface. Good/bad sorting gates and other factors can be set up with setpoints to help facilitate your hardness inspection processes.

The SonoDur-R provides all of the features of the SonoDur2 hardness testing device but can scale into a fully-automated process line.

Probe Compatibility

All SonoDur manual and motorized probes are compatible with the SonoDur-R without restrictions. Simply connect each probe through a USB port.

Product Features:

• Fully isolated, digital I/O interface for the direct controlling of actuators; potential-free signal contacts for full remote control via SP
• Speed: Approx. 1 measurement per second
• Measured value counter with statistical functions
• Fast amortization through the durable SonoDur 2 manual measurement probes SO0H (HV1), SONO-50H (HV5) and SO00H (HV10)
• USB interface for measured value transmission
• Operates on 24VDC voltage or an external power supply
• All SonoDur manual and motorized probes can be used
• Large measured data memory 2GB (approx. 90,000 measurement series, each with 1,000 measurements)
• Measured value changes in color depending on the applied set point

Applications:

• Hardness testing on serial parts following heat treatment
• Hardness testing on parts following surface processing
• Measuring coating hardness on gravure cylinders