武漢歐亞泰克機電設備有限公司
專業進口，有詢價請或者
曹

/ +86 27 84899919 ext 820
傳真/ +86 27 84796721

1.歐美*，*，可提供海關報關單及原廠證明
2.德國公司源頭采購，享受本土低價，切實節省采購成本
3.攜手優秀物流服務商，確保貨期準確和降低貨物耗損
4.嚴格執行國家保修規定，與供應商合作確保貨物質量
5.專業服務，值得信賴，高素質員工，ERP全流程操作，精細化管理
6.快速報價，合作有禮，保證zui快速的報價速度，VIP體驗

FC7系列火焰探測器(Brahma)

 詳細介紹

FC11系列火焰探測器(Brahma)

 詳細介紹

• FC7系列火焰探測器 品牌：Brahma（布拉瑪） 產地：意大利

  產品介紹

  火焰探測器起感光作用。連接至燃燒器的控制器，感知燃燒器火焰是否正常。 不同型號的燃燒器控制器必須配合合適型號的火焰探測器使用。

  技術參數

  FC7/R 1.5...5.5 LUX FC7/A 1.5...3.0 LUX FC7/V 3.0...5.5 LUX 直徑 17.5mm FC8系列火焰探測器(Brahma)  詳細介紹   FC8系列火焰探測器 品牌：Brahma（布拉瑪） 產地：意大利  產品介紹 火焰探測器起感光作用。連接至燃燒器的控制器，感知燃燒器火焰是否正常。 *FC7系列火焰探測器(Brahma)（布拉瑪）不同型號的燃燒器控制器必須配合合適型號的火焰探測器使用。  技術參數 FC8/R 1.5...5.5 LUX FC8/A 1.5...3.0 LUX FC8/V 3.0...5.5 LUX 直徑 17.5mm FC13系列火焰探測器(Brahma)  詳細介紹   FC13系列火焰探測器 品牌：Brahma（布拉瑪） 產地：意大利  產品介紹 火焰探測器起感光作用。連接至燃燒器的控制器，感知燃燒器火焰是否正常。 不同型號的燃燒器控制器必須配合合適型號的火焰探測器使用。 橡膠套桶  技術參數 FC13/R 1.5...6.5 LUX FC13/A 1.5...3.0 LUX FC13/V 3.0...6.5 LUX 管體直徑 8.5mm 安裝直徑 14.2mm   FD1系列火焰探測器(Brahma)  詳細介紹   FD1系列火焰探測器 品牌：Brahma（布拉瑪）*FC7系列火焰探測器(Brahma)（布拉瑪） 產地：意大利  產品介紹 The combustion process, depending on the type of fuel used, emits more or less light radiation belonging to the ultraviolet, visible or infrared spectrum. Of course, gas oil combustion generates a very bright flame, which is easily detectable by means of sensors using common photocells; nevertheless, at the same time gas oil combustion generates a quantity of substances not compley burnt (unburnt substances), which pollute and also dirty the combustion chamber step by step. By suitably adjusting the combustion, it is possible to solve this problem and improve the flame quality, making it similar to the flame produced by gas, natural gas or propane combustion (blue flame). Since photocells are not sensitive to blue flame light, in most gas burners the presence of flame is detected by exploiting the ionization principle; to this purpose, you simply need an electrode (electrically isolated metal rod) suitably "immersed" in the flame. This principle is not easily applicable in oil burners, as the electrode immersed in the flame gets dirty quickly (consequently losing its efficiency) and modifies the turbulence in the combustion chamber, thus creating serious problems. For all these reasons, it is necessary to detect the presence of flame by means of ultraviolet sensitive detectors.*FC7系列火焰探測器(Brahma)（布拉瑪） The FDx sensor uses a silicon preamplified active element, specifically designed for blue flame burner applications; the UV light peak detection of this sensor is around 310 nm. Thanks to the incorporation of suitable electronic components, this device can be fitted to the BRAHMA control boxes of the EUROBOX, EUROFLAT, MINIFLAT, MICROFLAT and EUROGAS series (suitable for gas burner applications); moreover, this sensor is particularly well fitted for the control boxes type GR1, GR1/Z and GR2 of the EUROOIL series and for any control boxes of the OIL-SYSTEM series (suitable for oil burner applications). In order to meet the widest range of market requirements, this device is available in the FD1 version (with front view) and in the FD2 version (with lateral view). Please note that the FDx detector is sensitive to the ultraviolet component of visible light; therefore, its use is recommended in burners fitted with closed combustion chambers and in an application environment perfectly shielded from visible light.  技術參數 主電壓 220-240V / 50...60Hz 功率 1V 可見光波長 290...350nm 可見光角度 8º zui大輸出電流 500uA 工作溫度 -20ºC...+60ºC 環境濕度 95% UV1系列火焰探測器(Brahma)  詳細介紹   UV1系列火焰探測器 品牌：Brahma（布拉瑪） 產地：意大利  產品介紹 The users’ different requirements regarding flame detection for gas systems, can be met by using the following probes of our production: UV1 standard phototube (Fig.2); UV1/A selected phototube; UV1/H high sensitivity phototube: Case: nylon*FC7系列火焰探測器(Brahma)（布拉瑪） Case diameter: mm 22 Case length: mm 85 Cable length: mm 600 (standard)

•