18964024669
當前位置：> 供求商機> AMN-W-10，銷售日本YUKEN線性伺服放大器
AMN-W-10，銷售日本YUKEN線性伺服放大器
In case of using socket welding flanges,
there is a case where the operating
pressure should be set lower than the
normal because of strength of the flanges.
Therefore, please pay cautious
attention to the operating pressure when
the socket welding flanges are used.
limited to -13 kPa (3.94 in. Hg. vacuum).
If phosphate ester or water containing
fluids are used, the maximum speed is limited to 1200 r/min.
PNP輸出•直接檢測，感應磁滯小。
對液壓油之水分及污染度無特殊要求。防塵防水等IP 65
可正確監視閥芯換向位置。
采用非接觸式，非接點式機件零磨耗，壽命特長。
For starting at low speed, the maximum
viscosity is limited. For details,
see the item of "Hydraulic Fluids" on page 3.
However, as for displacementof "26" and "33",
refer to page 29.Same as single pump
"PV2R1", refer to pagesHowever, as for
displacement of "52",
see the item of "Hydraulic Fluids" on page 3.
If PV2R3-116 is used at speed above
1700 r/min, the suction pressure is
limited to 0 kPa (0 in. Hg.).
If PV2R4-237 is used at speed above
1700 r/min, the suction pressure is
AMN-W-10，銷售日本YUKEN線性伺服放大器
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
