產品簡介
詳細介紹
DP460系列是專為不同的溫度,電流,電壓,應變計和傳感器測量應用而設計的。高精度和小規模相結合,使之成為大多數工業的理想選擇。DP460 - T和DP460 - RTD溫度測量機型采用了*的自動解決方案。此溫度儀表適合溫度傳感器或熱電偶溫度傳感器類型,J型,K可選。熱電偶可以選擇每通過一個小型旋轉開關。沒有校準需要熱電偶類型之間切換。另一種選擇小型DIP開關顯示。DP460 -電壓模型允許電流或電壓與輸入選擇開關很容易與后面的單元訪問過鏡頭前端。全部范圍為0到20 mA,上述任何子集(例如,4至20 mA,1至5 V),可縮放。兩個簡單的按鈕方便設置,用來設置為零(Lo),滿量程(HI)和小數點。指示器的可調節范圍為-999到9999顯示計數。DP462可以切換到六個與多輸入選擇相同類型的傳感器輸入之間。小型旋轉開關,由前面板可以方便的切換輸入。人們很容易修改基本DP460模型,并添加多種輸入板(DP460 - 206或DP460 - 403)。
DP460系列易于安裝在標準指標483mm的機架適配器版。四個版本可用于安裝1,2,3或4個指標器
The DP460 Series is designed for a variety of temperature, current, voltage, strain gage and load cell measuring applications. Excellent accuracy and small size combine to make it the ideal choice for most industrial indications.
The DP460-V voltage models allow selection between mA or voltage input with a switch easily accessible behind the snap-off front lens. Full scales are 0 to 20 mA or 0 to 10 V. These or any subset ( e.g., 4 to 20 mA, 1 to 5 V) can be scaled. Two simple pushbuttons conveniently located behind the snap-off lens are used to set zero (Lo), full scale (Hi) and a decimal point. The indicator can be scaled within its wide -999 to 9999 display count.
The DP462 meter has the ability to switch between up to six sensor inputs of the same type with its multi-input option. A miniature rotary switch, accessible from the front panel, allows convenient switching between inputs. Sensor hook-up is a snap-on/off terminal block located at the rear of the instrument. It is easy to modify a basic DP460 model and add the multi-input board (DP460-206 or DP460-403) in the field.
The Rack Adaptor Plate permits easy mounting of DP460 Series indicators in standard 483 mm (19") instrument racks. Four versions are available for mounting 1, 2, 3 or 4 indicators.