亚洲中文久久精品无码WW16,亚洲国产精品久久久久爰色欲,人人妻人人澡人人爽欧美一区九九,亚洲码欧美码一区二区三区

官方微信|手機版

產品展廳

產品求購企業資訊會展

發布詢價單
北京連華永興科技發展有限公司

化工儀器網>產品展廳>環境監測儀器>水質監測>其它水質分析> CS600CS600高精度碳硫測定儀

分享
舉報 評價

CS600CS600高精度碳硫測定儀

具體成交價以合同協議為準
產品標簽

CS600CS600高精度碳硫測定儀

聯系我們時請說明是化工儀器網上看到的信息，謝謝!


 

上海麗馳計量?jī)x器有限公司成立于2004年，是致力于生產銷售理化檢測計量?jī)x器設備及配套技術服務的公司，產品主要包括維氏硬度計，布氏硬度計，影像測量?jī)x，測厚儀，粗糙度儀，合金分析儀，測振儀，碳硫分析儀，可燃?xì)怏w分析儀，電火花檢漏儀，氣相色譜儀，礦山分析儀，原油水分測定儀，色差儀，白度儀，風速儀，照度計等設備，公司成立以來一直以為用戶提供高品質的產品和服務作為我們不懈的追求和永恒的理念。
上海麗馳計量?jī)x器有限公司和國內外多家*儀器設備生產廠商建立了技術與銷售的合作平臺，公司的銷售和服務工程師均經受了專業的技術培訓，可以為用戶提供優質的產品和完整適用的無損理化檢測，計量解決方案，麗馳公司全體員工期待著以*的技術和*的產品與您實現合作共贏，共同發展！

 

硬度計，影像測量?jī)x，涂層測厚儀，光譜分析儀，拉力試驗機，石油儀器，燃燒試驗儀，密度計，顯微鏡，探傷儀，水分測定儀，煤質分析儀器，電子天平，熱工儀表，電化學儀器

詳細說明:

CS600提供了一系列*的解決方案檢測碳和硫。當今的燃燒和紅外相結合的檢測技術使您能更準確、精確、使用方便靈活的剖析各種類型的金屬和無機材料。

Carbon and Sulfur in Steel, Nickel-Base, and Cobalt-Base Alloys
 
Instrument
CS600-Series
 
Sampling and Sample Preparation
Surface contamination on the sample can cause significant errors in the analytical data; therefore, care must be taken to ensure a clean, representative sample is analyzed. Solid
samples should be abraded with a clean file, rinsed in acetone and dried with warm air prior to analysis. Samples that cannot be abraded due to irregular shapes should be rinsed in a
suitable solvent such as acetone, and dried with warm air. Care
must be taken to remove all traces of the solvent. If a sample is porous, refrain from using solvents,
as it will be difficult to remove all traces of the solvent by drying. Refer to ASTM E1806 for additional sampling and sample preparation information.
 
Accessories
528-018 or 528-018HP Ceramic Crucibles （preheated）*; LECOCEL II （501-008） or
LECOCEL II HP （502-173） accelerator.
 
*Ceramic crucibles are baked in a muffle or tube furnace （LECO TF-10） at 1250oC for a minimum of
15 minutes, or at 1000oC for 40 minutes. The crucibles are removed from the furnace, allowed to cool for

 

 
 
 
 
1 to 2 minutes, and are transferred to a desiccator for storage. If the crucibles are not used within four hours, they should be re-baked.

 

 
Calibration
There are several suitable calibration samples available from LECO. Likewise, NIST, JK, JSS, and BCS are certified bodies that have a variety of certified reference materials （SRM/CRM） available as well. It is important that both high- and low-carbon ranges are calibrated. Single or multipoint calibration curves
can be utilized. Refer to the operator's instruction manual for details.
 
Method Parameters
Purge Time （seconds）:
1**
 
Delay Time （seconds）:
8**
 
Furnace Low Power （%）:
100
 
Furnace High Power （%）:
100
 
Furnace Ramp Rate:
0
 
 
 
Carbon
 
Sulfur
Minimum Timeout （seconds）:
40
40
Comparator Level:
1.00
1.00
Significant Digits:
4 or 5
4 or 5
Integration Delay:
0
0
 
 


 

**For optimum analytical performance on samples with low carbon and
sulfur content （ 0.05%）, a purge time of 10 seconds and a delay time of
20 seconds is recommended.

 
 
CS600


 

Procedure
1.   Prepare instrument for operation as outlined in the operator's instruction manual.
2.   Determine blank.
a.     Enter 1.0000 g weight into weight stack. b.      Add ~1.5 g of accelerator to crucible.
c.      Place the crucible on the furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.
d.     Repeat steps 2a through 2c a minimum of five times.
e.     Enter blank following procedure outlined in the operator's instruction manual.
3.   Calibrate.
a.     Weigh ~1.0 g calibration sample into crucible and enter weight into weight stack.
b.     Add ~1.5 g of accelerator on top of sample.
c.      Place the crucible on the furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.
d.     Repeat steps 3a through 3c a minimum of five times for each calibration sample intended for calibration.
e.     Calibrate using the procedure outlined in the operator's instruction manual.
4.   Analyze Samples.
a.     Weigh ~1.0 g sample into crucible and enter weight into weight stack.
b.     Add ~1.5 g of accelerator on top of sample.
c.      Place crucible on furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.
 
Note:   Some "solid" samples, notably nickel and/or cobalt-base alloys, are difficult to combust and may require additional accelerator. Likewise, reducing the sample to small chunks, chips, or pieces will facilitate combustion. For additional information on Carbon and Sulfur Determination using an Induction Furnace IR detection instrument, request LECO's Application Tips CD （209-050-055）.
 
Typical Results

 

Sample
Weight （g）
C %
S %
Sample
Weight （g）
C %
S %
LECO
1.0
0.605
0.0176
LECO
1.0
0.00089
0.00062
501-505
 
0.605
0.0172
502-348
 
0.00089
0.00067
Steel Ring
 
0.605
0.0169
Low C and S
 
0.00094
0.00068
0.607 % C
 
0.607
0.0171
Steel Pin
 
0.00095
0.00060
0.0172% S
 
0.607
0.0174
0.0009 % C
 
0.00085
0.00064
 
 
0.605
0.0176
0.0007 % S
 
0.00085
0.00061
 
 
0.606
0.0178
 
 
0.00090
0.00062
 
 
0.604
0.0173
 
 
0.00090
0.00060
 
 
0.606
0.0173
 
 
0.00090
0.00065
 
 
0.605
0.0168
 
 
0.00089
0.00055
 
X =
0.606
0.0173
 
X =
0.00090
0.00062
 
s =
0.001
0.0003
 
s =
0.00003
0.00004
 
LECO
 
1.0
 
0.0375
 
0.0223
 
LECO
 
1.0
 
0.0414
 
0.0025
501-501
 
0.0380
0.0221
501-933
 
0.0414
0.0027
Steel Ring
 
0.0375
0.0222
Ni-Base Alloy
 
0.0413
0.0027
0.0377 % C
 
0.0377
0.0222
Chip Sample
 
0.0414
0.0028
0.0220 % S
 
0.0376
0.0223
0.042 % C
 
0.0415
0.0027
 
 
0.0376
0.0222
0.003 % S
 
0.0413
0.0028
 
 
0.0373
0.0221
 
 
0.0414
0.0028
 
 
0.0376
0.0222
 
 
0.0415
0.0028
 
 
0.0377
0.0223
 
 
0.0412
0.0027
 
 
0.0377
0.0222
 
 
0.0414
0.0029
 
X =
0.0376
0.0222
 
X =
0.0414
0.0027
 
s =
0.0002
0.0001
 
s =
0.0001
0.0001

 


 



化工儀器網

采購商登錄
記住賬號    找回密碼
沒有賬號？免費注冊

提示

×

*您想獲取產品的資料：

以上可多選，勾選其他，可自行輸入要求

個人信息：

溫馨提示

該企業已關閉在線交流功能