現貨 124-47柔性高溫導電油墨及涂料

說明：124-47是一種柔性、導電、硅樹脂油墨和涂料，適合噴涂。不像

傳統的導電油墨和涂料，124-47附著在低表面能的基底上，具有高

耐溫性和低溫柔韌性。該產品具有優異的耐溶劑性。

124-47的一些應用包括但不限于硅墊圈涂層、廣泛的電磁干擾/射頻干擾屏蔽

各種塑料和高分子厚膜電路。124-47是為數不多的能與

硅酮基材和表面。此外，它還可用于某些類型的Teflon®表面。124-47是

可噴涂版本102-32/B507。

典型固化特性：

稠度稀液體

填充銀

銀（固化）百分比78

抗皺性佳

體積電阻（Ω-cm）0.0001

可焊性編號

水解穩定性優異

有效溫度范圍（℃）-70至+260

熱穩定性（攝氏度）達到325

建議的處理和固化：124-47已準備好按供應使用。進一步變薄可能是

通過加入少量甲乙酮來完成。使用前，一定要重新懸浮銀。

在要粘合的兩個表面上都涂上一層薄薄的粘合膠。對于大多數應用程序，當

在150℃下固化1至2小時，然后在室溫下固化1周。建議終用戶進行實驗

確定適合個別應用的溫度和時間。

儲存：保存期：25°C下2-3個月。冷凍儲存以減緩沉降。

安全和處理：含有易燃溶劑。在充分通風的情況下使用。遠離火花

還有明火。避免長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗

從皮膚上移除。

現貨 124-47柔性高溫導電油墨及涂料

 124-47
FLEXIBLE, HIGH TEMPERATURE, ELECTRICALLY CONDUCTIVE INK AND COATING
DESCRIPTION: 124-47 is a flexible, electrically conductive, silicone ink and coating suitable for spraying. Unlike
conventional conductive inks and coatings, 124-47 adheres to low surface energy substrates and has high
temperature resistance as well as low temperature flexibility. This product exhibits excellent solvent resistance.
Some applications for 124-47 include, but are not limited to, silicone gasket coatings, emi/rfi shielding of a wide
variety of plastics and polymer thick film circuitry. 124-47 is one of the few conductive adhesives that can bond to
silicone substrates and surfaces. In addition, it can be used on some types of Teflon® surfaces. 124-47 is a
sprayable version of 102-32/B507.
TYPICAL CURED PROPERTIES:
Consistency Thin Liquid
Filler Silver
Percent Silver (cured) 78
Crease Resistance Excellent
Volume Resistance (Ω-cm) 0.0001
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -70 to +260
Thermal Stability (°C) Good to 325
SUGGESTED HANDLING & CURING: 124-47 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of Methyl Ethyl Ketone. Prior to using, be certain to re-suspend silver.
Apply thin film of adhesive to both surfaces to be bonded. Best properties, for most applications, result when
cured for 1 to 2 hours at 150°C followed by 1 week at room temperature. End user is advised to experimentally
determine temperature and time best suited for individual applications.
STORAGE: Shelf life: 2-3 months at 25°C. Store frozen to slow settling.
SAFETY & HANDLING: Contains flammable solvents. Use with adequate ventilation. Keep away from sparks
and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to
remove from skin.