MS37377C網絡分析儀MS37377C
- 公司名稱 上海博曦計量測試技術有限公司
- 品牌
- 型號
- 產地
- 廠商性質 經銷商
- 更新時間 2016/9/8 11:36:06
- 訪問次數 623
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
MS37377C網絡分析儀MS37377C
上海博曦儀器科技有限公司
上海博曦計量測試技術有限公司
:張鳳手 機:/
電 話:
: 2355599597
郵 箱:boxi1726@boxinstruments.com
公司:http://www.boxinstruments.com
地 址: 深圳市龍華新區東環一路天匯大廈C棟906-908室(油松路交叉處)
備注:*現金收購/回收:網絡分析儀、無線綜合測試儀、頻譜分析儀、視頻音頻分析儀、藍牙測試儀、視頻圖象信號源、LCR測試儀、高低頻信號源、示波器、萬用表、手機程控電源、直流電源、電子負載、頻率計、GPIB卡,PCI-GPIB,GPIB-USB-B等,二手儀器出售/維修/收購。二手儀器回收: 咨詢!!
MS37377C網絡分析儀MS37377C 40G
37100C/37200C/37300C
Vector Network Analyzers
Technical Data Sheet
Vector Network Analysis up to 65 GHz
SYSTEM DESCRIPTION
The Lightning 37200C/37300C Vector Network Analyzers (VNAs)
are high performance tools designed to make fast and accurate S-parameter measurements of active and passive devices across the
22.5 MHz to 65 GHz range. These network analyzers integrate a
synthesized source, S-parameter test set and tuned receiver into a
single compact package that is ideal for bench-top testing.
The Lightning 37100C VNAs are configured as Direct-Access
Receivers for antenna, frequency conversion, and multiple output
device measurements. These network analyzers consist of
a synthesized source and tuned receiver in a single compact unit,
with direct access provided to all four receiver samplers via the front
panel. The 37100C offers the ultimate flexibility to meet most
receiver measurement needs, while maintaining the ability to
measure all four S-parameters with the addition of a reflectometer
setup at the front end of the receiver.
Specifications for the 37100C/37200C/37300C models are detailed
on the following pages.
High throughput measurements are achieved in each model
through the use of fast, 12-term error corrected sweeps, fast GPIB
data transfers and an intuitive user interface. All measurement
results are displayed on a large LCD color display or on an external
VGA monitor.
For maximum productivity, the VNAs include as standard features:
Fast Sweeping Synthesized Source
Auto Reversing Test Set (37200C/37300C models only)
Solid-State Transfer Switch (37200C/37300C models only)
Four Independent Display Channels
Multiple Source Control of Two External Sources
Four Channel Receiver
Internal Hard and Floppy Disk Drives
LRL/LRM Calibration
Adapter Removal Calibrations
Fast Measurement Throughput via GPIB
Built-In AutoCal
®
Control
Each of the network analyzers is designed for easy upgradeability.
Any version of the 37000C VNA can be upgraded to accommodate
new capabilities or additional frequency ranges by ordering the
appropriate upgrade kit. 37100C to 37200C or 37200C to 37300C
upgrades are also supported.
SYSTEM PERFORMANCE
Dynamic Range:
The tables on the next page provide two definitions of dynamic
range:
"Receiver Dynamic Range" is defined as the difference between the
maximum signal level at Port 2 (or at any sampler input: a
for a 37100C) for 0.1 dB compression and the noise floor.
"System Dynamic Range" is defined as the difference between the
power incident on Port 2 in a through line connection and the noise
floor.
In preparing the tables, 10 Hz IF bandwidth and 512 averages were
used in calibration and measurement.
High Level Noise (typical): <0.04 dB and <0.5 degrees peak-to-peak variation in a 1 kHz IF bandwidth up to 20 GHz,
<0.08 dB and <1.0 degrees peak-to-peak variation up to 40 GHz,
<0.25 dB and <2.5 degrees peak-to-peak variation up to 65 GHz.
Model Numbers
2
A Reflectometer test set is available as a special option for the 37100C.
It contains the transfer switch, both attenuators and couplers. It also
offers two bias tees and a front panel amplifier loop for active device
testing. As compared to a 37300C VNA, the output power and hence the